The correct UV dose is crucial for reliable curing. If it is too low, curing may be incomplete. An unnecessarily high dose, on the other hand, can place a greater strain on the material and increase energy consumption.

The UV-MACS Starter Set offers everything needed to get started with precise and reproducible UV dose measurement. It combines the UV-MACS 2.1 with the PRUUVE UV-Strips of your choice.

Select the appropriate strip type for your application based on the UV system and dose range. This ensures you receive a set tailored to your process and can begin measuring right away.

With the UV-MACS 2.1, the flexible UV strips are calibrated before use and read again after the UV process. This makes it possible to determine the actual UV dose delivered during the process—even at measurement points that are difficult to access with conventional dosimeters.

How the Measurement Works

1. Select the appropriate UV strip
2. Place the UV strip
3. Calibrate with the UV-MACS
4. Perform the UV process
5. Read dose using the UV-MACS

Your Benefits

• Complete system for getting started with UV dose measurement
• UV-MACS 2.1 and matching UV strips in a set
• Choice of strip type that best suits your application
• Precise and reproducible UV dose measurement
• Measurement under actual process conditions
• Flexible measurement, even in hard-to-reach areas
• Easy monitoring and optimization of UV processes

Put Together a Set

Select the UV strips that are right for your process:

• 100 UV – for lower UV doses with conventional UV lamps
• 700 UV – for higher UV doses with conventional UV lamps
• 950 LED – for LED-UV applications at 365, 385 and 395 nm

Not sure which UV strip is right for you? Use our Product Finder or contact us.

Product information

More information about UV-MACS 2.1:

• Firmware
• Quick Start Guide
• Operating instructions
• FAQ

→ Find them at Product information

The correct UV dose is crucial for reliable curing. With the UV-Strips 100 UV the actual UV dose applied in the process can be determined. The 100 UV variant is intended for lower dose ranges for Hg, Fe and Ga lamps .

The thin, flexible and adhesive UV strips are applied directly to the desired measurement point, are calibrated with the UV-MACS 2.1 before irradiation and read out again using the UV-MACS after the UV process.

This makes it possible to monitor UV processes even in areas that are difficult to access with conventional dosimeters.

Your Benefits

• Precise and reproducible UV dose measurement
• For lower dose ranges with Hg, Fe and Ga emitters
• Thin, flexible and adhesive
• Measurement under actual process conditions
• Easy calibration and readout with the UV-MACS 2.1

Requirement

The UV strips can only be calibrated and analysed in combination with the UV-MACS 2.1. The UV-MACS 2.1 is not included in this package and is available separately.

Package Contents

10 × UV-Strip 100 UV

Which UV strip is the right one?

The appropriate measurement range depends, among other things, on the lamp type, power and process parameters.

→ Find out with the Product Finder

The correct UV dose is crucial for reliable curing. With the UV-Strips 700 UV the actual UV dose applied in the process can be determined. The 700 UV variant is intended for higher dose ranges for Hg, Fe and Ga emitters .

The thin, flexible and adhesive UV strips are applied directly to the desired measurement point, are calibrated with the UV-MACS 2.1 before irradiation and read out again using the UV-MACS after the UV process.

This makes it possible to monitor UV processes even in areas that are difficult to access with conventional dosimeters.

Your Benefits

• Precise and reproducible UV dose measurement
• For higher dose ranges for Hg, Fe and Ga emitters
• Thin, flexible and adhesive
• Measurement under actual process conditions
• Easy calibration and readout with the UV-MACS 2.1

Requirement

The UV strips can only be calibrated and analysed in combination with the UV-MACS 2.1. The UV-MACS 2.1 is not included in this package and is available separately.

Package Contents

10 × UV-Strip 700 UV

Which UV strip is the right one?

The appropriate measurement range depends, among other things, on the lamp type, power and process parameters.

→ Find out with the Product Finder

The correct UV dose is crucial for reliable curing. The UV-Strips 950 LED are used for measuring UV dose for LED-UV with wavelengths of 365, 385 and 395 nm .

The thin, flexible and adhesive UV strips are applied directly to the desired measurement point, are calibrated with the UV-MACS 2.1 before irradiation and read out again using the UV-MACS after the LED-UV process.

This makes it easy to monitor LED-UV processes and take measurements even in areas that are difficult to access with conventional dosimeters.

Your Benefits

• Precise and reproducible UV dose measurement
• For LED-UV at 365, 385 and 395 nm
• Thin, flexible and adhesive
• Measurement under actual process conditions
• Easy calibration and readout with the UV-MACS 2.1

Requirement

The UV strips can only be calibrated and analysed in combination with the UV-MACS 2.1. The UV-MACS 2.1 is not included in this package and is available separately.

Package Contents

10 × UV-Strips 950 LED

Which UV strip is the right one?

The appropriate measurement range depends, among other things, on the lamp type, power, and process parameters.

→ Find out with the Product Finder

The correct UV dose is crucial for reliable curing. If it is too low, curing may be incomplete. An unnecessarily high dose, on the other hand, can place a greater strain on the material and increase energy consumption.

With the UV-MACS 2.1 the UV dose actually applied in the process can be determined precisely and reproducibly. To do this, the flexible PRUUVE UV strips are calibrated before use, exposed to UV radiation during the UV process, and then analyzed using the UV-MACS.

This allows UV processes to be reliably monitored, compared and specifically optimized—even at measurement points that are difficult to access with conventional dosimeters.

How the Measurement Works

1. Place the UV strip
2. Calibrate with the UV-MACS
3. Perform the UV process
4. Read dose using the UV-MACS

Your Benefits

• Precise and reproducible UV dose measurement
• Monitoring of actual process conditions
• Flexible measurement, even in hard-to-reach areas
• Easy monitoring and optimization of UV processes

Product information

More information about UV-MACS 2.1:

• Firmware
• Quick Start Guide
• Operating instructions
• FAQ

→ Find them at Product information